meta data for this page
  •  

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
wiki:software:software:smartpltlive:setup:networkconfigassistent [2021/05/02 03:06]
frhs created 		wiki:software:software:smartpltlive:setup:networkconfigassistent [2021/05/02 03:11] (current)
frhs [Step by Step]
Line 8: Line 8:
  
 The Netowkr config assistent is assigning an Static IP adress to the network device in your computer you are using to connect to the ALS-Shooting equipment. The Netowkr config assistent is assigning an Static IP adress to the network device in your computer you are using to connect to the ALS-Shooting equipment.
 +
 +''**Note for experts**: the ALS Equipment comes with a preset static IP Address in the Range of 192.168.178.100 - 192.168.178.245. During fabrication we count this number up to lower the chance you get two devices with the same IP Address in your network. However you can change the IP Address of the devices in the SmartPLT Live Software. We are using no DHCP Configuration by default as in many configurations you dont have a router or any other DHCP Server available, so its a bit more easy to set static unique IP Adresses on each device even it has the downside that you need to configure a static IP Address on your Computer as well.''
 +
  
 ===== Step by Step ===== ===== Step by Step =====
Line 14: Line 17:
   - After you starte the Assistent you will see this window on your screen \\ {{:wiki:software:software:smartpltlive:setup:pasted:20210502-025832.png?nolink&550x204}}   - After you starte the Assistent you will see this window on your screen \\ {{:wiki:software:software:smartpltlive:setup:pasted:20210502-025832.png?nolink&550x204}}
   - **On this window you need to select the network interface you want to use to connect to your ALS-Shooting device**. Select the network interface from the list. If more then one items are in the list, please veryfy which adapter you want to use to connet to your SmartPLT Target. For instance if you working on a laptop computer normally you have connected the equipment with a wire to your computer so you are not using the WIFI / WLAN adapter. So look for a an interface in the list that has **not **the word "WIFI", "Wireless", "WLAN" in its name. Instead you are looking for a network interface thats named "Gigabit Network", "Ethernet" or similar. Select it from the List like you see in the picture: \\ {{:wiki:software:software:smartpltlive:setup:pasted:20210502-030454.png?nolink&550x206}}   - **On this window you need to select the network interface you want to use to connect to your ALS-Shooting device**. Select the network interface from the list. If more then one items are in the list, please veryfy which adapter you want to use to connet to your SmartPLT Target. For instance if you working on a laptop computer normally you have connected the equipment with a wire to your computer so you are not using the WIFI / WLAN adapter. So look for a an interface in the list that has **not **the word "WIFI", "Wireless", "WLAN" in its name. Instead you are looking for a network interface thats named "Gigabit Network", "Ethernet" or similar. Select it from the List like you see in the picture: \\ {{:wiki:software:software:smartpltlive:setup:pasted:20210502-030454.png?nolink&550x206}}
-  - Click the Auto Configure SmartPLT button.+  - Click the **Auto Configure SmartPLT** button.
   - Resart SmartPLT Live Software   - Resart SmartPLT Live Software
   - Now the Computer sould be able to connect to your ALS-Shooting Ethernet Equipment   - Now the Computer sould be able to connect to your ALS-Shooting Ethernet Equipment